How do I clean or descale Formula Pro Advanced ?

To clean your Formula Pro Advanced daily (it is VERY IMPORTANT to clean every 4 bottles) :

Step 1: Remove the funnel and lid by pulling them towards you and then downwards.
Step 2: Clean the funnel and lid using hot soapy water, then rinse them. Make sure they are completely dry before replacing them.
Step 3: Wipe the area under the sealed powder container with a paper towel or clean, dry cloth.
Step 4: Clean up any milk powder spillage on the base.

Please note that it is not necessary to remove the powder container or dismantle the sealed container components for daily cleaning.

For a more thorough cleaning:

Step 1: Hand wash all parts (container lid, mixing propeller, wheel lock with silicone scraper, dosing wheel and powder container) using hot soapy water, then rinse and dry thoroughly.
Step 2: Wash the water tank using hot soapy water, then rinse and dry thoroughly.

To descale your machine (once a month):

Step 1: Remove the water tank, empty it and fill it with white vinegar and 600 ml of purified water.
Step 2: Place the water tank on the appliance and a container with a capacity of more than 300 ml under the funnel.
Step 3: Select the "300 ml" option using the "ml" button, then press the "water only" button.
Step 4: Empty the container, replace it under the funnel and press the "water only" button again.
Step 5: Now unplug the appliance, remove the water tank and empty it. Leave the appliance unplugged for 4 hours.
Step 6: Wash, rinse and then fill the water tank to the "max" level using purified water, then replace the tank on the appliance.
Step 7: Plug in the machine, place a 300 ml container under the funnel and use the "water only" button to perform a 300 ml cycle. Repeat this operation until the "low water level" indicator lights up.
Step 8: Fill the water tank with purified water, then use the appliance again as normal.

If you have any questions about cleaning or descaling the Formula Pro Advanced, please contact our customer service department using our contact form.

Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request